KISTENWERK
Made-to-measure organisation for Euro stacking containers. Inserts, dividers, ventilation and system parts are generated from the inner dimensions of your container – not from a catalogue.
Open generatorApplication packagesDeutschWhy made to measureSame outer size, different inner size
Euro stacking containers are standardised only in their outer dimensions. At 600 × 400 mm the inner floor size ranges from about 544 × 364 mm to 570 × 370 mm depending on the manufacturer. Ready-made inserts therefore usually fit only their own product line. KISTENWERK works with container profiles and a measuring assistant: the grid is derived from your measured inner floor size, and the height stays below the usable stacking height.
Parts13 generators in one tool
Insert trays
Compartments on your own grid, stackable, with label ledge and embossed type number.
Contour inserts
Pockets for tools and devices – from shapes or from a photo on a light background.
Dividers up to 600 mm
Cross slots; long walls are split automatically and joined with a puzzle connection.
Filter cassettes
For hole saws from 25 to 102 mm, with filter disc, protective cap and clamping ring. Plus fan adapters and grommets.
QR plaques and kanban
Two-colour plaques with QR code, card holders up to A7 – for inventory and reordering.
Hole plates and system parts
Plug grids for adapters and net cups, slide rails, rim connectors, handle inserts.
ProcessFour steps to the right part
Profile from the list or your own measurement in the measuring assistant.
Basic mode with presets or expert mode with all dimensions.
Preview, material requirement and notes on print bed and stacking height.
Send the parameter file with type number to office@schicht-werk.eu – quotation with material and quantity.
ApplicationsApplication packages
Each package contains a matched selection of parts, quantities and material recommendations.
MaterialsFor every application
| Use | Material |
|---|---|
| Workshop, storage | PETG |
| Vehicle, outdoor, sun | ASA |
| permanently damp (worm bin, hydroponics) | PP or PETG |
| Clamping, damping | TPU |
Not for direct food contact. Inserts do not carry stacking loads; the container manufacturer's fill weight applies.
For businessesCompany ID and reordering
For businesses, your own ID replaces the Schicht-Werk signature. Every configuration receives a type number – reorders need no new configuration. Container profiles, kanban holders and QR plaques can be matched to your operational processes.